Search/APT28 hackers deploy customized variant of Covenant open-source tool
● Story

APT28 hackers deploy customized variant of Covenant open-source tool

This spy tool has been quietly stealing data for years ESET researchers have traced the resurgence of Sednit through a modern toolkit built around two complementary implants, BeardShell and Covenant, each relying on a separate cloud provider to ensure operational resilience. This dual-implant architecture has enabled sustained surveillance of Ukrainian military personnel since at least April 2024. The Sednit group itself was tied to Unit 26165 of the GRU by the US Department of Justice in 2016, identifying it as part of Russia’s Main Intelligence Directorate. A spy tool hiding in plain sight ESET’s account of modern Sednit activities begins with SlimAgent, an espionage implant discovered on a Ukrainian governmental machine by CERT-UA in April 2024. SlimAgent is a simple yet efficient…

View graph Export
CVEs
0
Highest CVSS
—
In KEV
0
Sources
3
Connections
10 relationships
This spy tool has been quietly stealing data for years
This spy tool has been quietly stealing data for years ESET researchers have traced the resurgence of Sednit through a modern toolkit built around two complementary implants, BeardShell and Covenant, each relying on a separate cloud provider to ensure operational resilience. This dual-implant architecture has enabled sustained surveillance of Ukrainian military personnel since at least April 2024. The Sednit group itself was tied to Unit 26165 of the GRU by the US Department of Justice in 2016, identifying it as part of Russia’s Main Intelligence Directorate. A spy tool hiding in plain sight ESET’s account of modern Sednit activities begins with SlimAgent, an espionage implant discovered on a Ukrainian governmental machine by CERT-UA in April 2024. SlimAgent is a simple yet efficient spying tool capable of logging keystrokes, capturing screenshots, and collecting clipboard data. Within its telemetry ESET identified previously unknown samples with code similar to SlimAgent, which were deployed as early as 2018 – six years before the Ukrainian case – against governmental entities in two European countries. Thus, SlimAgent appears to be an evolution of the Xagent keylogger module, which has been deployed as a standalone component since at least 2018. Xagent is a custom toolset used exclusively by the Sednit group for more than six years. BeardShell: Cloud storage turned spy channel SlimAgent was not the only implant found on the Ukrainian machine in 2024; BeardShell – a much more recent addition to Sednit’s custom arsenal – was deployed there as well. BeardShell is a sophisticated implant capable of executing PowerShell commands within a .NET runtime environment, while leveraging the legitimate cloud storage service Icedrive as its Command & Control channel. The shared use of a rare obfuscation technique, combined with its co-location with SlimAgent, leads ESET to assess with high confidence that BeardShell is part of Sednit’s custom arsenal. Covenant: The open-source tool repurposed for espionage Since the initial 2024 case, Sednit continued deploying BeardShell through 2025 and into 2026, primarily in long-term espionage operations targeting Ukrainian military personnel. To maintain persistent access to these high-value targets, Sednit systematically deploys another implant alongside BeardShell: Covenant, the final component of its modern arsenal. Covenant is an open-source .NET post exploitation framework and provides over 90 built-in tasks, supporting capabilities such as data exfiltration, target monitoring, and network pivoting. Since 2023, Sednit developers have made a number of modifications and experiments with Covenant to establish it as their primary espionage implant, keeping BeardShell mainly as a fallback in case Covenant encounters operational issues, such as the takedown of its cloud-based infrastructure. Sednit has successfully relied on Covenant for several years, particularly against selected targets in Ukraine. For instance, in 2025, our analysis of Sednit-controlled Covenant cloud drives revealed machines that had been monitored for more than six months. In January 2026, Sednit also deployed Covenant in a series of spearphishing campaigns exploiting the CVE 2026 21509 vulnerability, as reported by CERT UA. The same hands, a decade later The sophistication of BeardShell and the extensive modifications made to Covenant demonstrate that Sednit’s developers remain fully capable of producing advanced custom implants. Furthermore, the shared code and techniques linking these tools to their 2010-era predecessors strongly suggest continuity within the development team.
helpnetsecurity.comMar 10, 2026extracted
APT28 hackers deploy customized variant of Covenant open-source tool
The Russian state-sponsored APT28 threat group is using a custom variant of the open-source Covenant post-exploitation framework for long-term espionage operations. Also tracked as Fancy Bear, Forest Blizzard, Strontium, and Sednit, the APT28 hacker group is known for developing high-end implants and breaching notable entities, such as the German Parliament, multiple French organizations, government networks in Poland, and European NATO member countries. Researchers at cybersecurity company ESET noticed that since April 2024, the Russian group has started using in attacks two implants named BeardShell and Covenant. "This dual-implant approach enabled long-term surveillance of Ukrainian military personnel," ESET notes in a report today. The two pieces of malware have been used recently to target central executive bodies of Ukraine in attacks that exploited the CVE-2026-21509 vulnerability in Microsoft Office via malicious DOC files. The researchers uncovered these malware families after discovering SlimAgent, a keylogging implant deployed in a Ukrainian government system capable of keystroke capture, clipboard collection, and screenshot capture. BeardShell is a modern implant that leverages the legitimate cloud storage service Icedrive for command-and-control (C2) communication. It can execute PowerShell commands in a .NET runtime environment and was used together with SlimAgent, according to a report from CERT-UA in June 2025. ESET found that BeardShell also uses a unique obfuscation technique previously seen in Xtunnel, a network-pivoting tool that APT28 used in the 2010s. In the recent attacks, the Russian threat group paired BeardShell with a heavily modified version of the open-source Covenant .NET post-exploitation framework. The changes they introduced include deterministic implant identifiers tied to host characteristics, modified execution flow to evade behavioral detection, and new cloud-based communication protocols. Since July 2025, the threat actor has used the Filen cloud provider with Covenant. Previously, the attacker used Koofr and pCloud services. ESET says Covenant is used as the primary implant, and BearShell serves as the fallback tool. “Since 2023, Sednit developers have made a number of modifications and experiments with Covenant to establish it as their primary espionage implant, keeping BeardShell mainly as a fallback in case Covenant encounters operational issues, such as the takedown of its cloud-based infrastructure.” - ESET ESET believes that APT28’s advanced malware development team returned to activity in 2024, giving the threat group new long-term espionage capabilities. The technical similarities with 2010-era malware indicate continuity in the threat group’s development team. Overall prevention scores can hide what happens after initial access. Once attackers are using valid credentials, prevention drops sharply. The Blue Report 2026 measures defenses technique by technique across 338 million simulations run in customer production environments. Get the report
bleepingcomputer.comMar 10, 2026extracted
APT28-Linked Campaign Deploys BadPaw Loader and MeowMeow Backdoor in Ukraine
Cybersecurity researchers have disclosed details of a new Russian cyber campaign that has targeted Ukrainian entities with two previously undocumented malware families named BadPaw and MeowMeow. "The attack chain initiates with a phishing email containing a link to a ZIP archive. Once extracted, an initial HTA file displays a lure document written in Ukrainian concerning border crossing appeals to deceive the victim," ClearSky said in a report published this week. In parallel, the attack chain leads to the deployment of a .NET-based loader called BadPaw, which then establishes communication with a remote server to fetch and deploy a sophisticated backdoor called MeowMeow. The campaign has been attributed with moderate confidence to the Russian state-sponsored threat actor known as APT28, based on the targeting footprint, the geopolitical nature of the lures used, and overlaps with techniques observed in previous Russian cyber operations. The starting point of the attack sequence is a phishing email sent from ukr[.]net, likely in an attempt to establish credibility and secure the trust of targeted victims. Present in the message is a link to a purported ZIP file, causing the user to be redirected to a URL that loads an "exceptionally small image," effectively acting as a tracking pixel to signal the operators that the link was clicked. Once this step is complete, the victim is redirected to a secondary URL from where the archive is downloaded. The ZIP file includes an HTML Application (HTA) that, once launched, drops a decoy document as a distraction mechanism, while it executes follow-on stages in the background. "The dropped decoy document serves as a social engineering tactic, presenting a confirmation of receipt for a government appeal regarding a Ukrainian border crossing," ClearSky said. "This lure is intended to maintain the veneer of legitimacy." The HTA file also carries out checks to avoid running within sandbox environments. It does this by querying the Windows Registry key "KLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\InstallDate" to estimate the "age" of the operating system. The malware is designed to abort execution if the system was installed less than ten days prior. Should the system meet the environment criteria, the malware locates the downloaded ZIP archive and extracts two files from it – a Visual Basic Script (VBScript) and a PNG image – and saves them to disk under different names. It also creates a scheduled task to execute the VBScript as a way of ensuring persistence on the infected system. The primary responsibility of the VBScript is to extract malicious code embedded within the PNG image, an obfuscated loader referred to as BadPaw that's capable of contacting a command-and-control (C2) server to download additional components, including an executable named MeowMeow. "Consistent with the 'BadPaw' tradecraft, if this file is executed independently of the full attack chain, it initiates a dummy code sequence," the Israeli cybersecurity company explained. "This decoy execution displays a graphical user interface (GUI) featuring a picture of a cat, aligning with the visual theme of the initial image file from which the primary malware was extracted." "When the 'MeowMeow' button within the decoy GUI is clicked, the application simply displays a 'Meow Meow Meow' message, performing no further malicious actions. This serves as a secondary functional decoy to mislead manual analysis." The backdoor's malicious code is activated only when it's executed with a certain parameter ("-v") that's provided by the initial infection chain, and after checking that it's running on an actual endpoint as opposed to a sandbox, and no forensic and monitoring tools like Wireshark, Procmon, Ollydbg, and Fiddler are running in the background. At its core, MeowMeow is equipped to remotely execute PowerShell commands on the compromised host and support file system operations, such as the ability to read, write, and delete data. ClearSky said it identified Russian language strings in the source code, reinforcing the assessment that the activity is the work of a Russian-speaking threat actor. "The presence of these Russian-language strings suggests two possibilities: the threat actor committed an operational security (OPSEC) error by failing to localize the code for the Ukrainian target environment, or they inadvertently left Russian development artifacts within the code during the malware's production phase," it said.
thehackernews.comMar 5, 2026extracted
Related Stories
4
Analyzing Sharepoint Exploits (CVE-2025-53770, CVE-2025-53771), (Wed, Jul 23rd)
On July 19–20, 2025, various security companies and national CERTs published alerts about active exploitation of on-premise SharePoint servers. According to the reports, observed attacks did not require authentication, allowed attackers to gain full control over the infected servers, and were performed using an exploit chain of two vulnerabilities: CVE-2025-49704 and CVE-2025-49706, publicly named “ToolShell”. Additionally, on the same dates, Microsoft released out-of-band security patches for the vulnerabilities CVE-2025-53770 and CVE-2025-53771, aimed at addressing the security bypasses of previously issued fixes for CVE-2025-49704 and CVE-2025-49706. The release of the new, “proper” updates has caused confusion about exactly which vulnerabilities attackers are exploiting and whether they are using zero-day exploits. Kaspersky products proactively detected and blocked malicious activity linked to these attacks, which allowed us to gather statistics about the timeframe and spread of this campaign. Our statistics show that widespread exploitation started on July 18, 2025, and attackers targeted servers across the world in Egypt, Jordan, Russia, Vietnam, and Zambia. Entities across multiple sectors were affected: government, finance, manufacturing, forestry, and agriculture. While analyzing all artifacts related to these attacks, which were detected by our products and public information provided by external researchers, we found a dump of a POST request that was claimed to contain the malicious payload used in these attacks. After performing our own analysis, we were able to confirm that this dump indeed contained the malicious payload detected by our technologies, and that sending this single request to an affected SharePoint installation was enough to execute the malicious payload there. Our analysis of the exploit showed that it did rely on vulnerabilities fixed under CVE-2025-49704 and CVE-2025-49706, but by changing just one byte in the request, we were able to bypass those fixes. In this post, we provide detailed information about CVE-2025-49704, CVE-2025-49706, CVE-2025-53770, CVE-2025-53771, and one related vulnerability. Since the exploit code is already published online, is very easy to use, and poses a significant risk, we encourage all organizations to install the necessary updates. The exploit Our research started with an analysis of a POST request dump associated with this wave of attacks on SharePoint servers. We can see that this POST request targets the “/_layouts/15/ToolPane.aspx” endpoint and embeds two parameters: “MSOtlPn_Uri” and “MSOtlPn_DWP”. Looking at the code of ToolPane.aspx, we can see that this file itself does not contain much functionality and most of its code is located in the ToolPane class of the Microsoft.SharePoint.WebPartPages namespace in Microsoft.SharePoint.dll. Looking at this class reveals the code that works with the two parameters present in the exploit. However, accessing this endpoint under normal conditions is not possible without bypassing authentication on the attacked SharePoint server. This is where the first Microsoft SharePoint Server Spoofing Vulnerability CVE-2025-49706 comes into play. CVE-2025-49706 This vulnerability is present in the method PostAuthenticateRequestHandler, in Microsoft.SharePoint.dll. SharePoint requires Internet Information Services (IIS) to be configured in integrated mode. In this mode, the IIS and ASP.NET authentication stages are unified. As a result, the outcome of IIS authentication is not determined until the PostAuthenticateRequest stage, at which point both the ASP.NET and IIS authentication methods have been completed. Therefore, the PostAuthenticateRequestHandler method utilizes a series of flags to track potential authentication violations. A logic bug in this method enables an authentication bypass if the “Referrer” header of the HTTP request is equal to “/_layouts/SignOut.aspx”, “/_layouts/14/SignOut.aspx”, or “/_layouts/15/SignOut.aspx” using case insensitive comparison. The code displayed in the image above handles the sign-out request and is also triggered when the sign-out page is specified as the referrer. When flag6 is set to false and flag7 is set to true, both conditional branches that could potentially throw an “Unauthorized Access” exception are bypassed. On July 8, 2025, Microsoft released an update that addressed this vulnerability by introducing additional checks to detect the usage of the “ToolPane.aspx” endpoint with the sign-out page specified as the referrer. The added check uses case insensitive comparison to verify if the requested path ends with “ToolPane.aspx”. Is it possible to bypass this check, say, by using a different endpoint? Our testing has shown that this check can be easily bypassed. CVE-2025-53771 We were able to successfully bypass the patch for vulnerability CVE-2025-49706 by adding just one byte to the exploit POST request. All that was required to bypass this patch was to add a “/” (slash) to the end of the requested “ToolPane.aspx” path. On July 20, 2025, Microsoft released an update that fixed this bypass as CVE-2025-53771. This fix replaces the “ToolPane.aspx” check to instead check whether the requested path is in the list of paths allowed for use with the sign-out page specified as the referrer. This allowlist includes the following paths: “/_layouts/15/SignOut.aspx”, “/_layouts/15/1033/initstrings.js”, “/_layouts/15/init.js”, “/_layouts/15/theming.js”, “/ScriptResource.axd”, “/_layouts/15/blank.js”, “/ScriptResource.axd”, “/WebResource.axd”, “/_layouts/15/1033/styles/corev15.css”, “/_layouts/15/1033/styles/error.css”, “/_layouts/15/images/favicon.ico”, “/_layouts/15/1033/strings.js”, “/_layouts/15/core.js”, and it can contain additional paths added by the administrator. While testing the CVE-2025-49706 bypass with the July 8, 2025 updates installed on our SharePoint debugging stand, we noticed some strange behavior. Not only did the bypass of CVE-2025-49706 work, but the entire exploit chain did! But wait! Didn’t the attackers use an additional Microsoft SharePoint Remote Code Execution Vulnerability CVE-2025-49704, which was supposed to be fixed in the same update? To understand why the entire exploit chain worked in our case, let’s take a look at the vulnerability CVE-2025-49704 and how it was fixed. CVE-2025-49704 CVE-2025-49704 is an untrusted data deserialization vulnerability that exists due to improper validation of XML content. Looking at the exploit POST request, we can see that it contains two URL encoded parameters: “MSOtlPn_Uri” and “MSOtlPn_DWP”. We can see how they are handled by examining the code of the method GetPartPreviewAndPropertiesFromMarkup in Microsoft.SharePoint.dll. A quick analysis reveals that “MSOtlPn_Uri” is a page URL that might be pointing to an any file in the CONTROLTEMPLATES folder and the parameter “MSOtlPn_DWP” contains something known as WebPart markup. This markup contains special directives that can be used to execute safe controls on a server and has a format very similar to XML. While this “XML” included in the “MSOtlPn_DWP” parameter does not itself contain a vulnerability, it allows attackers to instantiate the ExcelDataSet control from Microsoft.PerformancePoint.Scorecards.Client.dll with CompressedDataTable property set to malicious payload and trigger its processing using DataTable property getter. Looking at the code of the ExcelDataSet’s DataTable property getter in Microsoft.PerformancePoint.Scorecards.Client.dll, we find the method GetObjectFromCompressedBase64String, responsible for deserialization of CompressedDataTable property contents. The data provided as Base64 string is decoded, unzipped, and passed to the BinarySerialization.Deserialize method from Microsoft.SharePoint.dll. Attackers use this method to provide a malicious DataSet whose deserialized content is shown in the image above. It contains an XML with an element of dangerous type "System.Collections.Generic.List1[[System.Data.Services.Internal.ExpandedWrapper2[...], System.Data.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]", which allows attackers to execute arbitrary methods with the help of the well-known ExpandedWrapper technique aimed at exploitation of unsafe XML deserialization in applications based on the .NET framework. In fact, this shouldn’t be possible, since BinarySerialization.Deserialize in Microsoft.SharePoint.dll uses a special XmlValidator designed to protect against this technique by checking the types of all elements present in the provided XML and ensuring that they are on the list of allowed types. However, the exploit bypasses this check by placing the ExpandedWrapper object into the list. Now, to find out why the exploit worked on our SharePoint debugging stand with the July 8, 2025 updates installed, let’s take a look at how this vulnerability was fixed. In this patch, Microsoft did not really fix the vulnerability but only mitigated it by adding the new AddExcelDataSetToSafeControls class to the Microsoft.SharePoint.Upgrade namespace. This class contains new code that modifies the web.config file and marks the Microsoft.PerformancePoint.Scorecards.ExcelDataSet control as unsafe. Because SharePoint does not execute this code on its own after installing updates, the only way to achieve the security effect was to manually run a configuration upgrade using the SharePoint Products Configuration Wizard tool. Notably, the security guidance for CVE-2025-49704 does not mention the need for this step, which means at least some SharePoint administrators may skip it. Meanwhile, anyone who installed this update but did not manually perform a configuration upgrade remained vulnerable. CVE-2025-53770 On July 20, 2025, Microsoft released an update with a proper fix for the CVE-2025-49704 vulnerability. This patch introduces an updated XmlValidator that now properly validates element types in XML, preventing exploitation of this vulnerability without requiring a configuration upgrade and, more importantly, addressing the root cause and preventing exploitation of the same vulnerability through controls other than Microsoft.PerformancePoint.Scorecards.ExcelDataSet. CVE-2020-1147 Readers familiar with previous SharePoint exploits might feel that the vulnerability CVE-2025-49704/CVE-2025-53770 and the exploit used by the attackers looks very familiar and very similar to the older .NET Framework, SharePoint Server, and Visual Studio Remote Code Execution Vulnerability CVE-2020-1147. In fact, if we compare the exploit for CVE-2020-1147 and an exploit for CVE-2025-49704/CVE-2025-53770, we can see that they are almost identical. The only difference is that in the exploit for CVE-2025-49704/CVE-2025-53770, the dangerous ExpandedWrapper object is placed in the list. This makes CVE-2025-53770 an updated fix for CVE-2020-1147. Conclusions Despite the fact that patches for the ToolShell vulnerabilities are now available for deployment, we assess that this chain of exploits will continue being used by attackers for a long time. We have been observing the same situation with other notorious vulnerabilities, such as ProxyLogon, PrintNightmare, or EternalBlue. While they have been known for years, many threat actors still continue leveraging them in their attacks to compromise unpatched systems. We expect the ToolShell vulnerabilities to follow the same fate, as they can be exploited with extremely low effort and allow full control over the vulnerable server. To stay better protected against threats like ToolShell, we as a community should learn lessons from previous events in the industry related to critical vulnerabilities. Specifically, the speed of applying security patches nowadays is the most important factor when it comes to fighting such vulnerabilities. Since public exploits for these dangerous vulnerabilities appear very soon after vulnerability announcements, it is paramount to install patches as soon as possible, as a gap of even a few hours can make a critical difference. At the same time, it is important to protect enterprise networks against zero-day exploits, which can be leveraged when there is no available public patch for vulnerabilities. In this regard, it is critical to equip machines with reliable cybersecurity solutions that have proven effective in combatting ToolShell attacks before they were publicly disclosed. Kaspersky Next with its Behaviour detection component proactively protects against exploitation of these vulnerabilities. Additionally, it is able to detect exploitation and the subsequent malicious activity. Kaspersky products detect the exploits and malware used in these attacks with the following verdicts: UDS:DangerousObject.Multi.Generic PDM:Exploit.Win32.Generic PDM:Trojan.Win32.Generic HEUR:Trojan.MSIL.Agent.gen ASP.Agent.* PowerShell.Agent.*
3 shared
Jul 28, 2025
US Tops Hit List as 396 SharePoint Systems Compromised Globally
On July 19–20, 2025, various security companies and national CERTs published alerts about active exploitation of on-premise SharePoint servers. According to the reports, observed attacks did not require authentication, allowed attackers to gain full control over the infected servers, and were performed using an exploit chain of two vulnerabilities: CVE-2025-49704 and CVE-2025-49706, publicly named “ToolShell”. Additionally, on the same dates, Microsoft released out-of-band security patches for the vulnerabilities CVE-2025-53770 and CVE-2025-53771, aimed at addressing the security bypasses of previously issued fixes for CVE-2025-49704 and CVE-2025-49706. The release of the new, “proper” updates has caused confusion about exactly which vulnerabilities attackers are exploiting and whether they are using zero-day exploits. Kaspersky products proactively detected and blocked malicious activity linked to these attacks, which allowed us to gather statistics about the timeframe and spread of this campaign. Our statistics show that widespread exploitation started on July 18, 2025, and attackers targeted servers across the world in Egypt, Jordan, Russia, Vietnam, and Zambia. Entities across multiple sectors were affected: government, finance, manufacturing, forestry, and agriculture. While analyzing all artifacts related to these attacks, which were detected by our products and public information provided by external researchers, we found a dump of a POST request that was claimed to contain the malicious payload used in these attacks. After performing our own analysis, we were able to confirm that this dump indeed contained the malicious payload detected by our technologies, and that sending this single request to an affected SharePoint installation was enough to execute the malicious payload there. Our analysis of the exploit showed that it did rely on vulnerabilities fixed under CVE-2025-49704 and CVE-2025-49706, but by changing just one byte in the request, we were able to bypass those fixes. In this post, we provide detailed information about CVE-2025-49704, CVE-2025-49706, CVE-2025-53770, CVE-2025-53771, and one related vulnerability. Since the exploit code is already published online, is very easy to use, and poses a significant risk, we encourage all organizations to install the necessary updates. The exploit Our research started with an analysis of a POST request dump associated with this wave of attacks on SharePoint servers. We can see that this POST request targets the “/_layouts/15/ToolPane.aspx” endpoint and embeds two parameters: “MSOtlPn_Uri” and “MSOtlPn_DWP”. Looking at the code of ToolPane.aspx, we can see that this file itself does not contain much functionality and most of its code is located in the ToolPane class of the Microsoft.SharePoint.WebPartPages namespace in Microsoft.SharePoint.dll. Looking at this class reveals the code that works with the two parameters present in the exploit. However, accessing this endpoint under normal conditions is not possible without bypassing authentication on the attacked SharePoint server. This is where the first Microsoft SharePoint Server Spoofing Vulnerability CVE-2025-49706 comes into play. CVE-2025-49706 This vulnerability is present in the method PostAuthenticateRequestHandler, in Microsoft.SharePoint.dll. SharePoint requires Internet Information Services (IIS) to be configured in integrated mode. In this mode, the IIS and ASP.NET authentication stages are unified. As a result, the outcome of IIS authentication is not determined until the PostAuthenticateRequest stage, at which point both the ASP.NET and IIS authentication methods have been completed. Therefore, the PostAuthenticateRequestHandler method utilizes a series of flags to track potential authentication violations. A logic bug in this method enables an authentication bypass if the “Referrer” header of the HTTP request is equal to “/_layouts/SignOut.aspx”, “/_layouts/14/SignOut.aspx”, or “/_layouts/15/SignOut.aspx” using case insensitive comparison. The code displayed in the image above handles the sign-out request and is also triggered when the sign-out page is specified as the referrer. When flag6 is set to false and flag7 is set to true, both conditional branches that could potentially throw an “Unauthorized Access” exception are bypassed. On July 8, 2025, Microsoft released an update that addressed this vulnerability by introducing additional checks to detect the usage of the “ToolPane.aspx” endpoint with the sign-out page specified as the referrer. The added check uses case insensitive comparison to verify if the requested path ends with “ToolPane.aspx”. Is it possible to bypass this check, say, by using a different endpoint? Our testing has shown that this check can be easily bypassed. CVE-2025-53771 We were able to successfully bypass the patch for vulnerability CVE-2025-49706 by adding just one byte to the exploit POST request. All that was required to bypass this patch was to add a “/” (slash) to the end of the requested “ToolPane.aspx” path. On July 20, 2025, Microsoft released an update that fixed this bypass as CVE-2025-53771. This fix replaces the “ToolPane.aspx” check to instead check whether the requested path is in the list of paths allowed for use with the sign-out page specified as the referrer. This allowlist includes the following paths: “/_layouts/15/SignOut.aspx”, “/_layouts/15/1033/initstrings.js”, “/_layouts/15/init.js”, “/_layouts/15/theming.js”, “/ScriptResource.axd”, “/_layouts/15/blank.js”, “/ScriptResource.axd”, “/WebResource.axd”, “/_layouts/15/1033/styles/corev15.css”, “/_layouts/15/1033/styles/error.css”, “/_layouts/15/images/favicon.ico”, “/_layouts/15/1033/strings.js”, “/_layouts/15/core.js”, and it can contain additional paths added by the administrator. While testing the CVE-2025-49706 bypass with the July 8, 2025 updates installed on our SharePoint debugging stand, we noticed some strange behavior. Not only did the bypass of CVE-2025-49706 work, but the entire exploit chain did! But wait! Didn’t the attackers use an additional Microsoft SharePoint Remote Code Execution Vulnerability CVE-2025-49704, which was supposed to be fixed in the same update? To understand why the entire exploit chain worked in our case, let’s take a look at the vulnerability CVE-2025-49704 and how it was fixed. CVE-2025-49704 CVE-2025-49704 is an untrusted data deserialization vulnerability that exists due to improper validation of XML content. Looking at the exploit POST request, we can see that it contains two URL encoded parameters: “MSOtlPn_Uri” and “MSOtlPn_DWP”. We can see how they are handled by examining the code of the method GetPartPreviewAndPropertiesFromMarkup in Microsoft.SharePoint.dll. A quick analysis reveals that “MSOtlPn_Uri” is a page URL that might be pointing to an any file in the CONTROLTEMPLATES folder and the parameter “MSOtlPn_DWP” contains something known as WebPart markup. This markup contains special directives that can be used to execute safe controls on a server and has a format very similar to XML. While this “XML” included in the “MSOtlPn_DWP” parameter does not itself contain a vulnerability, it allows attackers to instantiate the ExcelDataSet control from Microsoft.PerformancePoint.Scorecards.Client.dll with CompressedDataTable property set to malicious payload and trigger its processing using DataTable property getter. Looking at the code of the ExcelDataSet’s DataTable property getter in Microsoft.PerformancePoint.Scorecards.Client.dll, we find the method GetObjectFromCompressedBase64String, responsible for deserialization of CompressedDataTable property contents. The data provided as Base64 string is decoded, unzipped, and passed to the BinarySerialization.Deserialize method from Microsoft.SharePoint.dll. Attackers use this method to provide a malicious DataSet whose deserialized content is shown in the image above. It contains an XML with an element of dangerous type "System.Collections.Generic.List1[[System.Data.Services.Internal.ExpandedWrapper2[...], System.Data.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]", which allows attackers to execute arbitrary methods with the help of the well-known ExpandedWrapper technique aimed at exploitation of unsafe XML deserialization in applications based on the .NET framework. In fact, this shouldn’t be possible, since BinarySerialization.Deserialize in Microsoft.SharePoint.dll uses a special XmlValidator designed to protect against this technique by checking the types of all elements present in the provided XML and ensuring that they are on the list of allowed types. However, the exploit bypasses this check by placing the ExpandedWrapper object into the list. Now, to find out why the exploit worked on our SharePoint debugging stand with the July 8, 2025 updates installed, let’s take a look at how this vulnerability was fixed. In this patch, Microsoft did not really fix the vulnerability but only mitigated it by adding the new AddExcelDataSetToSafeControls class to the Microsoft.SharePoint.Upgrade namespace. This class contains new code that modifies the web.config file and marks the Microsoft.PerformancePoint.Scorecards.ExcelDataSet control as unsafe. Because SharePoint does not execute this code on its own after installing updates, the only way to achieve the security effect was to manually run a configuration upgrade using the SharePoint Products Configuration Wizard tool. Notably, the security guidance for CVE-2025-49704 does not mention the need for this step, which means at least some SharePoint administrators may skip it. Meanwhile, anyone who installed this update but did not manually perform a configuration upgrade remained vulnerable. CVE-2025-53770 On July 20, 2025, Microsoft released an update with a proper fix for the CVE-2025-49704 vulnerability. This patch introduces an updated XmlValidator that now properly validates element types in XML, preventing exploitation of this vulnerability without requiring a configuration upgrade and, more importantly, addressing the root cause and preventing exploitation of the same vulnerability through controls other than Microsoft.PerformancePoint.Scorecards.ExcelDataSet. CVE-2020-1147 Readers familiar with previous SharePoint exploits might feel that the vulnerability CVE-2025-49704/CVE-2025-53770 and the exploit used by the attackers looks very familiar and very similar to the older .NET Framework, SharePoint Server, and Visual Studio Remote Code Execution Vulnerability CVE-2020-1147. In fact, if we compare the exploit for CVE-2020-1147 and an exploit for CVE-2025-49704/CVE-2025-53770, we can see that they are almost identical. The only difference is that in the exploit for CVE-2025-49704/CVE-2025-53770, the dangerous ExpandedWrapper object is placed in the list. This makes CVE-2025-53770 an updated fix for CVE-2020-1147. Conclusions Despite the fact that patches for the ToolShell vulnerabilities are now available for deployment, we assess that this chain of exploits will continue being used by attackers for a long time. We have been observing the same situation with other notorious vulnerabilities, such as ProxyLogon, PrintNightmare, or EternalBlue. While they have been known for years, many threat actors still continue leveraging them in their attacks to compromise unpatched systems. We expect the ToolShell vulnerabilities to follow the same fate, as they can be exploited with extremely low effort and allow full control over the vulnerable server. To stay better protected against threats like ToolShell, we as a community should learn lessons from previous events in the industry related to critical vulnerabilities. Specifically, the speed of applying security patches nowadays is the most important factor when it comes to fighting such vulnerabilities. Since public exploits for these dangerous vulnerabilities appear very soon after vulnerability announcements, it is paramount to install patches as soon as possible, as a gap of even a few hours can make a critical difference. At the same time, it is important to protect enterprise networks against zero-day exploits, which can be leveraged when there is no available public patch for vulnerabilities. In this regard, it is critical to equip machines with reliable cybersecurity solutions that have proven effective in combatting ToolShell attacks before they were publicly disclosed. Kaspersky Next with its Behaviour detection component proactively protects against exploitation of these vulnerabilities. Additionally, it is able to detect exploitation and the subsequent malicious activity. Kaspersky products detect the exploits and malware used in these attacks with the following verdicts: UDS:DangerousObject.Multi.Generic PDM:Exploit.Win32.Generic PDM:Trojan.Win32.Generic HEUR:Trojan.MSIL.Agent.gen ASP.Agent.* PowerShell.Agent.*
3 shared
Jul 31, 2025
US Tops Hit List as 396 SharePoint Systems Compromised Globally
Check Point Research (CPR) conducted a focused analysis of Storm-2603, a threat actor associated with recent ToolShell exploitations, together with other Chinese APT groups. Storm-2603 utilizes a custom malware Command and Control (C2) framework dubbed internally by the attacker as “ak47c2”. This framework includes at least two different types of clients: HTTP-based (dubbed by us “ak47http”) and DNS-based (dubbed by us “ak47dns”). Based on VirusTotal data, Storm-2603 likely targeted some organizations in Latin America throughout the first half of 2025, in parallel to attacking organizations in APAC. Some of the actor’s TTPs align with many other ransomware groups, and involve open-source tools such as PsExec and masscan. In addition, the threat actors use a custom tool that leverages the BYOVD (Bring Your Own Vulnerable Driver) technique to tamper with endpoint protections. Storm-2603 attacks involved multiple ransomware families, sometimes bundled together. Those are commonly deployed by abusing DLL hijacking. Check Point Research (CPR) has been closely monitoring the ongoing exploitation of a group of Microsoft SharePoint Server vulnerabilities collectively referred to as “ToolShell.” These active attacks leverage four vulnerabilities—CVE-2025-49704, CVE-2025-49706, CVE-2025-53770, and CVE-2025-53771—and are attributed to multiple China affiliated threat actors. Among the threat groups identified by Microsoft, two are known APTs: Linen Typhoon (aka APT27) and Violet Typhoon (aka APT31). Another group is a newly observed, previously undocumented cluster called Storm-2603. While Microsoft linked this cluster’s activity to potential ransomware deployment, it was unable to assess the group’s objectives. As part of our ongoing investigation into ToolShell and its associated risks, we launched a targeted effort to better understand and characterize the threat posed by Storm-2603. Throughout our analysis, we uncovered several files likely tied to Storm-2603 intrusions, offering new insights that correspond to Microsoft’s description of the group. In this publication, we provide an in-depth examination of Storm-2603’s tactics, techniques, and procedures (TTPs), along with a technical breakdown of the ak47c2, a custom malware framework used in their attacks and their different ransomware payloads. Storm-2603 was first mentioned by Microsoft during investigations into a set of attacks on Microsoft SharePoint servers, known as the “ToolShell” campaign. While some activity was tied to known Chinese affiliated groups like Linen Typhoon (APT27) and Violet Typhoon (APT31), Storm-2603 appeared as a new, previously unreported actor. Microsoft linked the group to Lockbit and Warlock ransomware use. Figure 1 – Events associated with Storm-2603. Microsoft’s report provided only limited information about Storm-2603, including some of the TTPs associated with it, most of them quite generic. In addition, some of the reported indicators of compromise (IOCs) helped us uncover additional artifacts associated with previous Storm-2603 intrusions. One domain in particular, update.updatemicfosoft[.]com, linked to Storm-2603’s SharePoint exploitation, turned out to have been used in earlier campaigns dating back to March 2025. In those operations, it served as a C2 server for both DNS tunneling malware and an HTTP backdoor and was part of infrastructure used to deliver LockBit Black and Warlock/x2anylock ransomware. Our search for cases where the IOCs reported by Microsoft, revealed two incidents in which LockBit Black and WarLock ransomware variants were deployed together, in addition to multiple other tools, mostly open-source. In April 2025, a RAR archive named Evidencia.rar was uploaded to VirusTotal. The archive contains several artifacts likely extracted from compromised machines in a Storm-2603 case in a LATAM country. The artifacts in the archive provide a look at some of the open-source tools used by the actors in the intrusions which correlates with previous knowledge of the group: WinPcap – Captures and filters network traffic on Windows. PsExec – Executes commands on remote Windows systems. SharpHostInfo – Collects host and domain info on Windows environments. nxc – Exploits common vulnerabilities in network services. In addition to the open-source tools, the archive also contains the custom backdoor used by the group, as well as its unique ransomware payloads. dnsclient.exe – A custom backdoor utilized by Storm-2603 that communicates over DNS tunneling with update.updatemicfosoft[.]com, a domain associated with the group. See the next section for our analysis of the backdoor. 7z.exe & 7z.dll – Legitimate 7z executable side-loading malicious 7z.dll delivering X2anylock (aka Warlock), a ransomware used by Storm-2603. bbb.msi – An installer which uses clink_x86.exe to side-load clink_dll_x86.dll, leading to the execution of LockBit Black ransomware. Another MSI file uploaded to VirusTotal in April used a similar deployment method, starting with the MSI installer to launch multiple ransomware strains simultaneously: Figure 2 – MSI Multi-Ransomware Deployment. The MSI relies on the following files: MpCmdRun.exe & Mpclient.dll – Warlock Ransomware, deployed via DLL-hijacking. clink_x86.exe & clink_dll_x86.dll – LockBit Black ransomware, deployed via DLL-hijacking. z.exe & z.dll – x2anylock ransomware, deployed via DLL-hijacking. VMToolsEng.exe – Custom Antivirus Terminator. ServiceMouse.sys – Vulnerable driver used by VMToolsEng.exe for killing Antivirus processes. log.exe – A list of Antivirus processes to kill. msi.bat – Executes VMToolsEng.exe. 1.bat – Executes all the needed executables and the MSI. We attributed two custom backdoors to Storm-2306, both of which appear to be part of the framework named AK47 C2 based on the shared PDB path: C:\Users\Administrator\Desktop\work\tools\ak47c2\. When executed, the program immediately hides its console window, determines the host computer name (defaulting to unknown.local if that fails), and builds a DNS‑based command‑and‑control payload. It chooses a random five-character session ID, such as H4T14, and prefixes it with 1 for task requests or 2 for result uploads (e.g., 1H4T14 or 2H4T14). Each element, such as the task/result tag, a size flag (a for “all” when the entire message fits into one request), and the computer name, is XOR‑encoded with the ASCII key “VHBD@H”, converted to hexadecimal, and concatenated with dots before being prepended to the C2 domain update.micfosoft[.]com. This what the overall query looks like: DNS TXT and MG (a mail group member record type) record lookups (DnsQuery_A) are used to transmit and retrieve data. If the C2 server is unreachable, the client simply receives error 9003 (DNS_ERROR_RCODE_NAME_ERROR). Otherwise, the response text is decoded from hex, XOR‑decrypted, and parsed for the delimiter “:::”, which separates metadata from the actual command string. Commands run under cmd.exe /c 2>&1; a built‑in directive sleep n pauses execution for n seconds. For outputs larger than 0xFF bytes, the backdoor fragments data into 63‑byte sub‑segments. Each DNS query then follows: HttpClient backdoor has the pdb path C:\Users\Administrator\Desktop\work\tools\ak47c2\httpclient-cpp\x64\Release\httpclient-cpp.pdb and uses plain HTTP instead of DNS for the C2. It is built as a 64‑bit console program that also immediately hides its window on launch. On start‑up, the malware gathers the host computer name (similar to the DNS version, it defaults to unknown.local), then builds a JSON object with the fields cmd, cmd_id, fqdn, result, and type. For a task request, the object looks like this: {"cmd":"","cmd_id":"","fqdn":" ","result":"","type":"task"} After the host executes a command, the result is sent back with type:”result”. Before transmission, the entire JSON blob is XOR‑encrypted with the ASCII key “VHBD@H”, converted to hexadecimal, and placed in the body of an HTTP POST to “/” with generic headers (Content‑Type: text/plain, Accept: */*). The C2 replies with a similarly encoded JSON where the cmd field contains the next command. The implant executes it via cmd.exe /c 2>&1 and returns the output. We identified that during these attacks, several types of ransomware were deployed simultaneously. One is regular LockBit Black, and the second uses the.x2anylock extension. This extension was later used by the Warlock ransomware operator, mentioned in Microsoft’s report on the SharePoint exploitation. The Warlock ransom note is usually saved as How to decrypt my data.txt and looks like this: Figure 3 – Warlock Group ransom note. The ransom notes for all ransomware strains deployed by Storm-2603 are named How to decrypt my data.log (x2anylock) or .README.txt (LockBit Black) and have the same short content: Your decrypt ID: [redacted] Tox ID Support: 3DCE[redacted] Email Support: [redacted]@proton.me,[redacted]@proton.me,[redacted]@proton.me You can contact us in email or qtox. This ransom note’s name How to decrypt my data.log appeared in a recent LinkedIn post by Huntress, describing the case where multiple ransomware families were deployed together against the same target. While not a new tactic, this approach is rarely observed among established ransomware groups. An important part of the infection package described earlier is called Antivirus Terminator. It is a custom command line tool abusing a third-party signed legitimate driver to kill processes. From what we can see, it’s been in the wild since at least late 2024. The tool requires administrative privileges on the infected machine. The screenshot below shows how the listing is displayed in the console when the tool is run without parameters: Figure 4 – Antivirus Terminator supported arguments when run without parameters. The tool first creates a service called ServiceMouse, where the path to the service binary file is ServiceMouse.sys from the package. Next, the tool communicates with the installed service via IO control code 0x99000050, which is responsible for killing processes. The tool also has more capabilities, like deleting files and uninstalling drivers, and these use different IO control codes (0x990000D0 and 0x990001D0). Figure 6 – Antivirus Terminator kills process using third-party driver. The supplied third-party driver is a legitimate and signed component of Antiy System In-Depth Analysis Toolkit, originally named AToolsKrnl64.sys. The toolkit was developed by Antiy Labs, a Chinese security vendor, and features a graphical user interface that allows users, among others, to interact with and manipulate processes. The ability to kill processes is the most important feature which is abused by threat actors in this particular case. Figure 7 – Antiy System In-Depth Analysis Tookit GUI. The following piece of code in the driver handles the IO control code 0x99000050 mentioned above: Figure 8 – IO control code processing in the Antiy driver. The second function is the piece of code responsible for killing a process with a given PID. In this report we analyze Storm-2603, a relatively new threat actor first mentioned by Microsoft during investigations into the “ToolShell” campaign targeting SharePoint servers. While some of the exploitation activity was tied to known Chinese APT groups, Storm-2603 stood out as a previously undocumented group linked to ransomware deployment. By examining infrastructure indicators shared in public reporting, we were able to connect this actor to earlier campaigns involving LockBit Black and Warlock/X2anylock ransomware, dating back to at least March 2025. These earlier attacks used similar infrastructure and tools, including DNS tunneling and HTTP-based backdoors. Interestingly, multiple ransomware variants were deployed in the same attack. This behavior, along with the overlap in techniques, helps us better understand how Storm-2603 operates “The Turkish Rat” Evolved Adwind in a Massive Ongoing Phishing Campaign Check Point Research Publications August 11, 2017 “The Next WannaCry” Vulnerability is Here Check Point Research Publications March 12, 2026 “Handala Hack” – Unveiling Group’s Modus Operandi SUBSCRIBE TO CYBER INTELLIGENCE REPORTS We value your privacy! BFSI uses cookies on this site. We use cookies to enable faster and easier experience for you. By continuing to visit this website you agree to our use of cookies.
3 shared
Aug 1, 2025
US Thwarts DNS Hijacking Network Controlled by Russian APT28 Hackers
The Russian threat actor known as APT28 (aka Forest Blizzard and Pawn Storm) has been linked to a fresh spear-phishing campaign targeting Ukraine and its allies to deploy a previously undocumented malware suite codenamed PRISMEX. "PRISMEX combines advanced steganography, component object model (COM) hijacking, and legitimate cloud service abuse for command-and-control," Trend Micro researchers Feike Hacquebord and Hiroyuki Kakara said in a technical report. The campaign is believed to be active since at least September 2025. The activity has targeted various sectors in Ukraine, including central executive bodies, hydrometeorology, defense, and emergency services, as well as rail logistics (Poland), maritime and transportation (Romania, Slovenia, Turkey), and logistical support partners involved in ammunition initiatives (Slovakia, Czech Republic), and military and NATO partners. The campaign is notable for the rapid weaponization of newly disclosed flaws, such as CVE-2026-21509 and CVE-2026-21513, to breach targets of interest, with infrastructure preparation observed on January 12, 2026, exactly two weeks before the former was publicly disclosed. In late February 2025, Akamai also disclosed that APT28 may have weaponized CVE-2026-21513 as a zero-day based on a Microsoft Shortcut (LNK) exploit that was uploaded to VirusTotal on January 30, 2026, well before the Windows maker pushed out a fix as part of its Patch Tuesday update on February 10, 2026. This pattern of zero-day exploitation indicates that the threat actor had advanced knowledge of the vulnerabilities prior to them being revealed by Microsoft. An interesting overlap between campaigns exploiting the two vulnerabilities is the domain "wellnesscaremed[.]com." This commonality, combined with the timing of the two exploits, has raised the possibility that the threat actors are stringing together CVE-2026-21513 and CVE-2026-21509 into a sophisticated two-stage attack chain. "The first vulnerability (CVE-2026-21509) forces the victim's system to retrieve a malicious .LNK file, which then exploits the second vulnerability (CVE-2026-21513) to bypass security features and execute payloads without user warnings," Trend Micro theorized. The attacks culminate in the deployment of either MiniDoor, an Outlook email stealer, or a collection of interconnected malware components collectively known as PRISMEX, so named for the use of a steganographic technique to conceal payloads within image files. These include - PrismexSheet, a malicious Excel dropper with VBA macros that extracts payloads embedded within the file using steganography, establishes persistence via COM hijacking, and displays a decoy document related to drone inventory lists and drone prices after macros are enabled. PrismexDrop, a native dropper that readies the environment for follow-on exploitation and uses scheduled tasks and COM DLL hijacking for persistence. PrismexLoader (aka PixyNetLoader), a proxy DLL that extracts the next-stage .NET payload scattered across a PNG image's ("SplashScreen.png") file structure using a bespoke "Bit Plane Round Robin" algorithm and runs it entirely in memory. PrismexStager, a COVENANT Grunt implant that abuses Filen.io cloud storage for C2. It's worth mentioning here that some aspects of the campaign were previously documented by Zscaler ThreatLabz under the moniker Operation Neusploit. APT28's use of COVENANT, an open-source command-and-control (C2) framework, was first highlighted by the Computer Emergency Response Team of Ukraine (CERT-UA) in June 2025. PrismexStager is assessed to be an expansion of MiniDoor and NotDoor (aka GONEPOSTAL), a Microsoft Outlook backdoor deployed by the hacking group in late 2025. In at least one incident in October 2025, the COVENANT Grunt payload was found to not only facilitate information gathering, but also run a destructive wiper command that erases all files under the "%USERPROFILE%" directory. This dual capability lends weight to the hypothesis that these campaigns could be designed for both espionage and sabotage. "This operation demonstrates that Pawn Storm remains one of the most aggressive Russia-aligned intrusion sets," Trend Micro said. "The targeting pattern reveals a strategic intent to compromise the supply chain and operational planning capabilities of Ukraine and its NATO partners." "The strategic focus on targeting the supply chains, weather services, and humanitarian corridors supporting Ukraine represents a shift toward operational disruption that may presage more destructive activities."
3 shared
Apr 8, 2026